Concealed Ceiling Systems Installation

(1) Typical Suspended Concealed Ceiling System with TCR & FC

Refer to figs 01 to 27

• Locate position of trusses or purlins or concrete etc and based on the ceiling plan, mark the position of the suspension rod brackets (Peer product code C74 or C47-74) on it at 1200 mm centres maximum along supporting members.
• Fix the C74 or C47-74 suspension rod brackets as appropriate to the steel purlins or bottom chord of the trusses with two self tapping screws in shear and to concrete with appropriate anchors.
• Cut all pre-hooked rods (Peer product code C21) to required length.
• Assemble adjustable suspension clip for TCR Peer product code C60) on all these suspension rods.
• Install all of these rods (Peer product code C21) into the suspension rod brackets C47-74.
• Attach Top Cross Rails (Peer product code TCR25 or TCR38) to the suspension clips (Peer product code C60).
• Connect Furring Channels (Peer product code FC18 or FC28) to top cross rails TCR25 or TCR38 with locking keys (Peer product code C39).
• Check and adjust concealed the ceiling system using a laser or other appropriate levelling device.
• Install ceiling lining boards as per manufacturers specification

Peer Industries C79S multidirectional clip was designed specifically to make building a non standard (square or rectangular) ceiling easy