Lining to Ceiling Frame:
Plasterboard Installation
Refer to Fig 75 for installation of pasterboard
- Cut the plasterboard sheets to size.
- Position the sheet with the recessed edge at right angles to the framing member.
- Press sheet firmly against the adhesive (if it is to be used - see manufacturer's
specifications) and fasten at the centre line of the sheet on every framing member as shown in fig 07.
- Use full sheets.
- Saw cut sheets around openings.
- Butt joints must be staggered and not in a straight line across the ceiling.
- All plasterboard installation should be in accordance with AS 2588 & AS 2589 and
manufacturers specifications.
Other Building Board Installation:
All building board installation should be in accordance with the manufacturer's specification and recommended installation methods.
|
